FESTO CK-1/8-PK-4 2027 Quick Connector
The FESTO CK-1/8-PK-4, part number 2027, is a quick connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO CK-1/8-PK-4 2027 Quick Connector
The FESTO CK-1/8-PK-4, part number 2027, is a quick connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Nominal size: 2.9 mm.
- Type of seal on screwed plug: Sealing ring.
- Mounting position: Any.
Technical Data
| Brand | FESTO |
|---|---|
| Model | CK-1/8-PK-4 |
| Part number | 2027 |
| Product type | Quick Connector |
| Nominal size | 2.9 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Straight design |
| Operating pressure complete temperature range | -0.095 MPa … 1 MPa |
| Operating pressure complete temperature range | -0.95 bar … 10 bar |
| Operating pressure complete temperature range | -13.775 psi … 145 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -10 °C … 60 °C |
| Nominal torque | 3.5 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Pneumatic connection, port 1 | Male thread G1/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 6 mm For barbed fitting inside diameter of 4 mm with nut |
| Material union nut | Wrought aluminium alloy, anodised |
| Material screwed plug | Anodised wrought aluminium alloy |
| Material sealing ring | Reinforced PA TPE-U(PU) |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model CK-1/8-PK-4, part number 2027, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies CK-1/8-PK-4 as a quick connector under part number 2027. It lists nominal size as 2.9 mm. Confirm the full variant before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | CK-1/8-PK-4 |
| Part number | 2027 |
| Product type | Quick Connector |
| Nominal size | 2.9 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Straight design |
| Operating pressure complete temperature range | -13.775 psi … 145 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |





