FESTO DFM-40-25-P-A-KF 170939 Guided Drive
The FESTO DFM-40-25-P-A-KF, part number 170939, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DFM-40-25-P-A-KF 170939 Guided Drive
The FESTO DFM-40-25-P-A-KF, part number 170939, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Distance from centre of gravity of load to yoke plate xs: 50 mm.
- Stroke: 25 mm.
- Piston diameter: 40 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DFM-40-25-P-A-KF |
| Part number | 170939 |
| Product type | Guided Drive |
| Distance from centre of gravity of load to yoke plate xs | 50 mm |
| Stroke | 25 mm |
| Piston diameter | 40 mm |
| Operating mode, drive unit | Yoke |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | Guidance |
| Position detection | Via proximity switch |
| Operating pressure | 0.15 MPa … 1 MPa |
| Operating pressure | 1.5 bar … 10 bar |
| Max. speed | 0.8 m/s |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Ambient temperature | -5 °C … 60 °C |
| Impact energy in end positions | 0.7 J |
| Max. force Fy | 1130 N |
| Max. force Fy static | 1260 N |
| Max. force Fz | 1130 N |
| Max. force Fz static | 1260 N |
| Max. moment Mx | 49.74 Nm |
| Max. torque Mx static | 55.44 Nm |
| Max. moment My | 18.66 Nm |
| Max. torque My static | 20.79 Nm |
| Max. moment Mz | 18.66 Nm |
| Max. torque Mz static | 20.79 Nm |
| Max. permissible torque load Mx as a function of stroke | 10.25 Nm |
| Max. effective load dependent upon stroke at defined distance xs | 149 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 686 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 754 N |
| Moving mass | 1074 g |
| Product weight | 2043 g |
| Centre of gravity of moving mass as a function of stroke | 28.2 mm |
| alternative connections | See product drawing |
| Pneumatic connection | G1/8 |
| Material cover | Wrought aluminium alloy |
| Material seals | NBR |
| Material housing | Wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DFM-40-25-P-A-KF, part number 170939, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DFM-40-25-P-A-KF as a guided drive under part number 170939. It lists distance from centre of gravity of load to yoke plate xs as 50 mm. Confirm the full variant before ordering.
Spare Parts Records
Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | DFM-40-25-P-A-KF |
| Part number | 170939 |
| Product type | Guided Drive |
| Distance from centre of gravity of load to yoke plate xs | 50 mm |
| Stroke | 25 mm |
| Piston diameter | 40 mm |
| Operating mode, drive unit | Yoke |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | Guidance |






