FESTO DHPS-35-A 1254052 Parallel Gripper

The FESTO DHPS-35-A, part number 1254052, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DHPS-35-A Category: Tags: , , Brand:

Description

FESTO DHPS-35-A 1254052 Parallel Gripper

The FESTO DHPS-35-A, part number 1254052, is a parallel gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 35.
  • Stroke per gripper jaws: 12.5 mm.
  • Max. replacement accuracy: ≤0.2 mm.

Technical Data

Brand FESTO
Model DHPS-35-A
Part number 1254052
Product type Parallel Gripper
Size 35
Stroke per gripper jaws 12.5 mm
Max. replacement accuracy ≤0.2 mm
Max. angular gripper jaw backlash ax, ay <0.5 deg
Max. gripper jaw backlash Sz <0.02 mm
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper <0.02 mm
Number of gripper jaws 2
Drive system Pneumatic
Mounting position Any
Mode of operation Double-acting
Gripper function Parallel
Gripper force back-up None
Design Lever Force pilot operated motion sequence
Guide Plain-bearing guide
Position detection Via proximity switch
Operating pressure 0.2 MPa … 0.8 MPa
Operating pressure 2 bar … 8 bar
Operating pressure 29 psi … 116 psi
Max. operating frequency of gripper 2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 95 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 123 ms
Max. mass per external gripper finger 450 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature 5 °C … 60 °C
Total gripping force, opening, 0.6MPa (6bar, 87 psi) 970 N
Total gripping force, closing, 0.6MPa (6bar, 87 psi) 910 N
Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) 483 N
Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) 450 N
Mass moment of inertia 12.7 kgcm²
Max. force on gripper jaw Fz static 450 N
Max. torque at gripper Mx static 50 Nm
Max. torque at gripper My static 50 Nm
Max. torque at gripper Mz static 50 Nm
Lubrication interval for guide components 10 MioCyc
Product weight 1285 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve
Pneumatic connection G1/8
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DHPS-35-A, part number 1254052, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DHPS-35-A as a parallel gripper under part number 1254052. It lists size as 35. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DHPS-35-A

Part number

1254052

Product type

Parallel Gripper

Size

35

Stroke per gripper jaws

12.5 mm

Max. replacement accuracy

≤0.2 mm

Max. angular gripper jaw backlash ax, ay

<0.5 deg

Max. gripper jaw backlash Sz

<0.02 mm

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

<0.02 mm

Number of gripper jaws

2