FESTO DSNU-20-10-P-A 19207 Iso Cylinder

The FESTO DSNU-20-10-P-A, part number 19207, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DSNU-20-10-P-A Category: Tags: , , Brand:

Description

FESTO DSNU-20-10-P-A 19207 Iso Cylinder

The FESTO DSNU-20-10-P-A, part number 19207, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 10 mm.
  • Piston diameter: 20 mm.
  • Piston rod thread: M8.

Technical Data

Brand FESTO
Model DSNU-20-10-P-A
Part number 19207
Product type Iso Cylinder
Stroke 10 mm
Piston diameter 20 mm
Piston rod thread M8
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Piston-rod end Male thread
Design Piston Piston rod Cylinder barrel
Position detection Via proximity switch
Operating pressure 0.1 MPa … 1 MPa
Operating pressure 1 bar … 10 bar
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.2 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 158.3 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 188.5 N
Moving mass for 0 mm stroke 44 g
Additional moving mass per 10 mm stroke 4 g
Basic weight for 0 mm stroke 186.8 g
Additional weight per 10 mm stroke 7.2 g
Type of mounting With accessories
Pneumatic connection G1/8
Material cover Wrought aluminium alloy Colourless anodised
Material seals NBR TPE-U(PU)
Material piston rod High-alloy stainless steel
Material cylinder barrel High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DSNU-20-10-P-A, part number 19207, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DSNU-20-10-P-A as a iso cylinder under part number 19207. It lists stroke as 10 mm. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

DSNU-20-10-P-A

Part number

19207

Product type

Iso Cylinder

Stroke

10 mm

Piston diameter

20 mm

Piston rod thread

M8

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Piston-rod end

Male thread

Design

Piston Piston rod Cylinder barrel

Position detection

Via proximity switch