FESTO GRLA-1/4-QS-8-D 193147 One-Way Flow Control Valve

The FESTO GRLA-1/4-QS-8-D, part number 193147, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: GRLA-1/4-QS-8-D Category: Tags: , , Brand:

Description

FESTO GRLA-1/4-QS-8-D 193147 One-Way Flow Control Valve

The FESTO GRLA-1/4-QS-8-D, part number 193147, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: Exhaust air one-way flow control function.
  • Pneumatic connection, port 1: QS-8.
  • Pneumatic connection, port 2: G1/4.

Technical Data

Brand FESTO
Model GRLA-1/4-QS-8-D
Part number 193147
Product type One-Way Flow Control Valve
Valve function Exhaust air one-way flow control function
Pneumatic connection, port 1 QS-8
Pneumatic connection, port 2 G1/4
Adjustment component Slotted head screw
Type of mounting Screw-in With male thread
Standard nominal flow rate in flow control direction 475 l/min
Standard nominal flow rate in blocked direction 325 l/min … 500 l/min
Operating pressure 0.02 MPa … 1 MPa
Operating pressure 0.2 bar … 10 bar
Operating pressure 2.9 psi … 145 psi
Ambient temperature -10 °C … 60 °C
Mounting position Any
Operating pressure complete temperature range 0.2 bar … 10 bar
Standard flow rate in flow control direction 0.6->0 MPa (6->0 bar, 87->0 psi) 720 l/min
Standard flow rate in non-return direction 0.6->0 MPa (6->0 bar, 87->0 psi) 610 l/min … 760 l/min
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Media temperature -10 °C … 60 °C
Nominal torque 10 Nm
Tolerance for nominal tightening torque ±20%
Product weight 42 g
Material seals NBR
Material hollow bolt Wrought aluminium alloy anodised
Material release ring POM
Material adjusting screw Brass
Material swivel fitting Die-cast zinc

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model GRLA-1/4-QS-8-D, part number 193147, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies GRLA-1/4-QS-8-D as a one-way flow control valve under part number 193147. It lists valve function as Exhaust air one-way flow control function. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

GRLA-1/4-QS-8-D

Part number

193147

Product type

One-Way Flow Control Valve

Valve function

Exhaust air one-way flow control function

Pneumatic connection, port 1

QS-8

Pneumatic connection, port 2

G1/4

Adjustment component

Slotted head screw

Type of mounting

Screw-in With male thread

Standard nominal flow rate in flow control direction

475 l/min

Standard nominal flow rate in blocked direction

325 l/min … 500 l/min

Operating pressure

0.02 MPa … 1 MPa