FESTO JH-5-1/8 8823 Pneumatic Valve
The FESTO JH-5-1/8, part number 8823, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO JH-5-1/8 8823 Pneumatic Valve
The FESTO JH-5-1/8, part number 8823, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, double solenoid.
- Type of actuation: Pneumatic.
- Construction width: 26 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | JH-5-1/8 |
| Part number | 8823 |
| Product type | Pneumatic Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Pneumatic |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 600 l/min |
| pneumatic working port | G1/8 |
| Operating pressure | 0 MPa … 1 MPa |
| Operating pressure | 0 bar … 10 bar |
| Design | Poppet seat |
| Nominal size | 5 mm |
| Grid dimension | 27 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of piloting | Direct |
| Pilot air supply | External |
| Flow direction | Non-reversible |
| lap | Underlap |
| Pilot pressure | 0.12 MPa … 1 MPa |
| Pilot pressure | 1.2 bar … 10 bar |
| Max. switching frequency | 12 Hz |
| Switching time reversal | 7 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -10 °C … 60 °C |
| Ambient temperature | -10 °C … 60 °C |
| Product weight | 330 g |
| Type of mounting | On manifold rail With through-hole |
| Pilot air port 12 | G1/8 |
| Pilot air port 14 | G1/8 |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Pneumatic connection, port 4 | G1/8 |
| Pneumatic connection, port 5 | G1/8 |
| Material seals | NBR TPE-U(PU) |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model JH-5-1/8, part number 8823, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies JH-5-1/8 as a pneumatic valve under part number 8823. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | JH-5-1/8 |
| Part number | 8823 |
| Product type | Pneumatic Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Pneumatic |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 600 l/min |
| pneumatic working port | G1/8 |
| Operating pressure | 0 bar … 10 bar |
| Design | Poppet seat |








