FESTO KMPPE-B-2,5 161879 Plug Socket With Cable
The FESTO KMPPE-B-2,5, part number 161879, is a plug socket with cable. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO KMPPE-B-2,5 161879 Plug Socket With Cable
The FESTO KMPPE-B-2,5, part number 161879, is a plug socket with cable. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Cable designation: With accessories.
- Frequency of connection: 500.
- Product weight: 243 g.
Technical Data
| Brand | FESTO |
|---|---|
| Model | KMPPE-B-2,5 |
| Part number | 161879 |
| Product type | Plug Socket With Cable |
| Cable designation | With accessories |
| Frequency of connection | 500 |
| Product weight | 243 g |
| Electrical connection 1, function | Field device side |
| Electrical connection 1, design | Round |
| Electrical connection 1, connection type | Socket |
| Electrical connection 1, cable outlet | Angled |
| Electrical connection 1, connector system | M16x0.75 to EN 61076-2-106 |
| Electrical connection 1, number of connections/cores | 8 |
| Electrical connection 1, used connections/cores | 8 |
| Electrical connection 1, type of mounting | Screw-type lock |
| Electrical connection 2, function | Control side |
| Electrical connection 2, connection type | Cable |
| Electrical connection 2, connector system | Open end |
| Electrical connection 2, number of connections/cores | 8 |
| Electrical connection 2, used connections/cores | 8 |
| Operational voltage range DC | 0 V…30 V |
| Current rating at 40° C | 5 A |
| Immunity to surge | 0.6 kV |
| Shielding | Yes |
| Cable length | 2.5 m |
| Cable characteristic | Standard |
| Test conditions cable | Test conditions on request |
| Cable diameter | 6.8 mm |
| Cable structure | 8 x 0.25 mm² |
| Nominal cross section conductor | 0.25 mm² |
| Wire ends | Cut off bluntly |
| Degree of protection | IP67 |
| Note on degree of protection | In mounted state |
| Ambient temperature | -30 °C…80 °C |
| Ambient temperature with moving cable | -5 °C…70 °C |
| Pollution degree | 1 |
| Material cable sheath | PVC |
| Cable sheath colour | Grey |
| Material housing | PA |
| Material screw-type lock | PA |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model KMPPE-B-2,5, part number 161879, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies KMPPE-B-2,5 as a plug socket with cable under part number 161879. It lists cable designation as With accessories. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | KMPPE-B-2,5 |
| Part number | 161879 |
| Product type | Plug Socket With Cable |
| Cable designation | With accessories |
| Frequency of connection | 500 |
| Product weight | 243 g |
| Electrical connection 1, function | Field device side |
| Electrical connection 1, design | Round |
| Electrical connection 1, connection type | Socket |
| Electrical connection 1, cable outlet | Angled |
| Electrical connection 1, connector system | M16x0.75 to EN 61076-2-106 |









