FESTO LCK-1/2-PK-13 4100 Elbow Quick Connector
The FESTO LCK-1/2-PK-13, part number 4100, is a elbow quick connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO LCK-1/2-PK-13 4100 Elbow Quick Connector
The FESTO LCK-1/2-PK-13, part number 4100, is a elbow quick connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Nominal size: 11.7 mm.
- Type of seal on screwed plug: Sealing ring.
- Mounting position: Any.
Technical Data
| Brand | FESTO |
|---|---|
| Model | LCK-1/2-PK-13 |
| Part number | 4100 |
| Product type | Elbow Quick Connector |
| Nominal size | 11.7 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape |
| Operating pressure complete temperature range | -0.095 MPa…1 MPa -0.95 bar…10 bar -13.775 psi…145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C…60 °C |
| Nominal torque | 14 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Pneumatic connection, port 1 | Male thread G1/2 |
| Pneumatic connection, port 2 | For barbed tting I.D. 13 mm with nut |
| Material union nut | Wrought aluminium alloy, anodised |
| Material sealing ring | Reinforced PA TPE-U(PU) |
| Material hollow bolt | Wrought aluminium alloy, anodised |
| Material swivel tting | Die-cast zinc |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model LCK-1/2-PK-13, part number 4100, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies LCK-1/2-PK-13 as a elbow quick connector under part number 4100. It lists nominal size as 11.7 mm. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | LCK-1/2-PK-13 |
| Part number | 4100 |
| Product type | Elbow Quick Connector |
| Nominal size | 11.7 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape |
| Operating pressure complete temperature range | -0.095 MPa…1 MPa -0.95 bar…10 bar -13.775 psi…145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |








