FESTO VUVG-LK10-M52-AT-M5-1R8L-S 8042543 Solenoid Valve

The FESTO VUVG-LK10-M52-AT-M5-1R8L-S, part number 8042543, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: VUVG-LK10-M52-AT-M5-1R8L-S Category: Tags: , , Brand:

Description

FESTO VUVG-LK10-M52-AT-M5-1R8L-S 8042543 Solenoid Valve

The FESTO VUVG-LK10-M52-AT-M5-1R8L-S, part number 8042543, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, single solenoid.
  • Type of actuation: Electrical.
  • Valve size: 10 mm.

Technical Data

Brand FESTO
Model VUVG-LK10-M52-AT-M5-1R8L-S
Part number 8042543
Product type Solenoid Valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Valve size 10 mm
Standard nominal flow rate (standardised to DIN 1343) 195 l/min
pneumatic working port M5
Operating voltage 24 V DC
Operating pressure 0.25 MPa … 0.7 MPa
Operating pressure 2.5 bar … 7 bar
Design Piston slide with sealing ring
Type of reset Pneumatic spring
Degree of protection IP65
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Signal status display LED
Max. switching frequency 2 Hz
Switching time off 17 ms
Switching time on 14 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 1600 µs
Max. negative test pulse with 1 signal 3000 µs
Characteristic coil data 24 V DC: 0.8 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 0 – No corrosion stress
Media temperature -5 °C … 50 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C … 50 °C
Product weight 45 g
Electrical connection 3-pin M8x1 A-encoded to EN 61076-2-104 Plug
Type of mounting On manifold rail With through-hole
Pneumatic connection, port 2 M5
Pneumatic connection, port 4 M5
Material seals HNBR NBR
Material housing Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model VUVG-LK10-M52-AT-M5-1R8L-S, part number 8042543, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies VUVG-LK10-M52-AT-M5-1R8L-S as a solenoid valve under part number 8042543. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

VUVG-LK10-M52-AT-M5-1R8L-S

Part number

8042543

Product type

Solenoid Valve

Valve function

5/2-way, single solenoid

Type of actuation

Electrical

Valve size

10 mm

Standard nominal flow rate (standardised to DIN 1343)

195 l/min

pneumatic working port

M5

Operating voltage

24 V DC

Operating pressure

2.5 bar … 7 bar