FESTO VUVG-LK14-B52-T-G18-1H2L-S 8042564 Solenoid Valve
The FESTO VUVG-LK14-B52-T-G18-1H2L-S, part number 8042564, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO VUVG-LK14-B52-T-G18-1H2L-S 8042564 Solenoid Valve
The FESTO VUVG-LK14-B52-T-G18-1H2L-S, part number 8042564, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, double solenoid.
- Type of actuation: Electrical.
- Valve size: 14 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | VUVG-LK14-B52-T-G18-1H2L-S |
| Part number | 8042564 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 14 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 660 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure | 0.15 MPa … 0.7 MPa |
| Operating pressure | 1.5 bar … 7 bar |
| Design | Piston slide with sealing ring |
| Degree of protection | IP40 |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Overlap |
| Signal status display | LED |
| Max. switching frequency | 2 Hz |
| Switching time reversal | 8 ms |
| Duty cycle | 100% |
| Max. positive test pulse with 0 signal | 1600 µs |
| Max. negative test pulse with 1 signal | 3000 µs |
| Characteristic coil data | 24 V DC: 0.8 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Media temperature | -5 °C … 50 °C |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 85 g |
| Electrical connection | 2-pin Plug pattern H, horizontal connection Plug |
| Type of mounting | On manifold rail With through-hole |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 4 | G1/8 |
| Material seals | HNBR NBR |
| Material housing | Wrought aluminium alloy |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model VUVG-LK14-B52-T-G18-1H2L-S, part number 8042564, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies VUVG-LK14-B52-T-G18-1H2L-S as a solenoid valve under part number 8042564. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | VUVG-LK14-B52-T-G18-1H2L-S |
| Part number | 8042564 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 14 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 660 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure | 1.5 bar … 7 bar |





