FESTO MFH-3-1/2-EX 535899 Solenoid Valve
The FESTO MFH-3-1/2-EX, part number 535899, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MFH-3-1/2-EX 535899 Solenoid Valve
The FESTO MFH-3-1/2-EX, part number 535899, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 3/2-way, single solenoid, closed.
- Type of actuation: Electrical.
- Construction width: 52 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MFH-3-1/2-EX |
| Part number | 535899 |
| Product type | Solenoid Valve |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 52 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 3700 l/min |
| pneumatic working port | G1/2 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 0.15 MPa … 0.8 MPa |
| Operating pressure | 1.5 bar … 8 bar |
| Design | Poppet seat |
| Type of reset | Mechanical spring |
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb |
| Explosion ignition protection type for dust | Ex h IIIC T130°C Db |
| Explosion ambient temperature | -5°C <= Ta <= +40°C |
| Degree of protection | IP65 |
| Nominal size | 14 mm |
| Grid dimension | 69 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting |
| Type of piloting | Piloted |
| Flow direction | Non-reversible |
| lap | Underlap |
| b value | 0.3 |
| Switching time off | 90 ms |
| Switching time on | 18 ms |
| Max. positive test pulse with 0 signal | 2200 µs |
| Max. negative test pulse with 1 signal | 3700 µs |
| Characteristic coil data | See solenoid coil, to be ordered separately |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -5 °C … 40 °C |
| Ambient temperature | -5 °C … 40 °C |
| Product weight | 1100 g |
| Electrical connection | Via F coil, to be ordered separately |
| Type of mounting | Either: On manifold rail With through-hole |
| Breather connection | M3 |
| Pilot exhaust port 82 | M5 |
| Pneumatic connection, port 1 | G1/2 |
| Pneumatic connection, port 2 | G1/2 |
| Pneumatic connection, port 3 | G1/2 |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MFH-3-1/2-EX, part number 535899, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MFH-3-1/2-EX as a solenoid valve under part number 535899. It lists valve function as 3/2-way, single solenoid, closed. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MFH-3-1/2-EX |
| Part number | 535899 |
| Product type | Solenoid Valve |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 52 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 3700 l/min |
| pneumatic working port | G1/2 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 1.5 bar … 8 bar |








