FESTO MFH-5/3E-3/8-B 19708 Solenoid Valve
The FESTO MFH-5/3E-3/8-B, part number 19708, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MFH-5/3E-3/8-B 19708 Solenoid Valve
The FESTO MFH-5/3E-3/8-B, part number 19708, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/3 exhausted.
- Type of actuation: Electrical.
- Construction width: 40 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MFH-5/3E-3/8-B |
| Part number | 19708 |
| Product type | Solenoid Valve |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 40 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 2200 l/min |
| pneumatic working port | G3/8 |
| Operating pressure | 0.3 MPa … 1 MPa |
| Operating pressure | 3 bar … 10 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Nominal size | 12 mm |
| Grid dimension | 41 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Overlap |
| Max. switching frequency | 3 Hz |
| Switching time off | 114 ms |
| Switching time on | 26 ms |
| Switching time reversal | 83 ms |
| Max. positive test pulse with 0 signal | 2200 µs |
| Max. negative test pulse with 1 signal | 3700 µs |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -40 °C … 60 °C |
| Media temperature | -10 °C … 60 °C |
| Ambient temperature | -5 °C … 40 °C |
| Product weight | 780 g |
| Electrical connection | Via F coil, to be ordered separately |
| Type of mounting | Either: On PR rail With through-hole |
| Pilot exhaust port 82 | M5 |
| Pilot exhaust port 84 | M5 |
| Pneumatic connection, port 1 | G3/8 |
| Pneumatic connection, port 2 | G3/8 |
| Pneumatic connection, port 3 | G3/8 |
| Pneumatic connection, port 4 | G3/8 |
| Pneumatic connection, port 5 | G3/8 |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MFH-5/3E-3/8-B, part number 19708, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MFH-5/3E-3/8-B as a solenoid valve under part number 19708. It lists valve function as 5/3 exhausted. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | MFH-5/3E-3/8-B |
| Part number | 19708 |
| Product type | Solenoid Valve |
| Valve function | 5/3 exhausted |
| Type of actuation | Electrical |
| Construction width | 40 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 2200 l/min |
| pneumatic working port | G3/8 |
| Operating pressure | 3 bar … 10 bar |
| Design | Piston gate valve |







