FESTO MFH-5/2-D-3-FR-C 151711 Solenoid Valve

The FESTO MFH-5/2-D-3-FR-C, part number 151711, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MFH-5/2-D-3-FR-C Category: Tags: , , Brand:

Description

FESTO MFH-5/2-D-3-FR-C 151711 Solenoid Valve

The FESTO MFH-5/2-D-3-FR-C, part number 151711, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, single solenoid.
  • Type of actuation: Electrical.
  • Construction width: 65 mm.

Technical Data

Brand FESTO
Model MFH-5/2-D-3-FR-C
Part number 151711
Product type Solenoid Valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Construction width 65 mm
Standard nominal flow rate (standardised to DIN 1343) 4500 l/min
pneumatic working port Sub-base size 3 to ISO 5599-1 G1/2
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.3 MPa … 1 MPa
Operating pressure 3 bar … 10 bar
Design Piston gate valve
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 14.5 mm
Grid dimension 71 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting via accessory Non-detenting
ISO code 352
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Suitability for vacuum No
Switching time off 79 ms
Switching time on 28 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Media temperature -10 °C … 60 °C
Sound pressure level 85 dB(A)
Ambient temperature -5 °C … 40 °C
Product weight 960 g
Electrical connection 3-pin Type A, with VACF-A coil Type B industry (11 mm), with MSF coil Via solenoid coil, to be ordered separately
Type of mounting On sub-base Via through-hole and screw
Pilot exhaust port 84 M5
Pneumatic connection, port 1 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 2 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 3 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 4 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 5 Sub-base size 3 to ISO 5599-1
Material seals HNBR NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MFH-5/2-D-3-FR-C, part number 151711, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MFH-5/2-D-3-FR-C as a solenoid valve under part number 151711. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

MFH-5/2-D-3-FR-C

Part number

151711

Product type

Solenoid Valve

Valve function

5/2-way, single solenoid

Type of actuation

Electrical

Construction width

65 mm

Standard nominal flow rate (standardised to DIN 1343)

4500 l/min

pneumatic working port

Sub-base size 3 to ISO 5599-1 G1/2

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

3 bar … 10 bar