FESTO MFH-5-1/2-S 35547 Solenoid Valve

The FESTO MFH-5-1/2-S, part number 35547, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MFH-5-1/2-S Category: Tags: , , Brand:

Description

FESTO MFH-5-1/2-S 35547 Solenoid Valve

The FESTO MFH-5-1/2-S, part number 35547, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, single solenoid.
  • Type of actuation: Electrical.
  • Construction width: 52 mm.

Technical Data

Brand FESTO
Model MFH-5-1/2-S
Part number 35547
Product type Solenoid Valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Construction width 52 mm
Standard nominal flow rate (standardised to DIN 1343) 3700 l/min
pneumatic working port G1/2
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0 MPa … 0.8 MPa
Operating pressure 0 bar … 8 bar
Design Poppet seat
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 14 mm
Grid dimension 69 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting
Type of piloting Piloted
Pilot air supply External
Flow direction Non-reversible
lap Underlap
Pilot pressure 0.15 MPa … 0.8 MPa
Pilot pressure 1.5 bar … 8 bar
b value 0.32
Switching time off 150 ms
Switching time on 21 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Characteristic coil data See solenoid coil, to be ordered separately
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -20 °C … 60 °C
Media temperature -10 °C … 60 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C … 40 °C
Product weight 1135 g
Electrical connection Via F coil, to be ordered separately
Type of mounting Either: On manifold rail With through-hole
Pilot exhaust port 84 M5
Pilot air port 14 G1/8
Pneumatic connection, port 1 G1/2
Pneumatic connection, port 2 G1/2
Pneumatic connection, port 3 G1/2
Pneumatic connection, port 4 G1/2
Pneumatic connection, port 5 G1/2
Material seals NBR TPE-U(PU)
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MFH-5-1/2-S, part number 35547, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MFH-5-1/2-S as a solenoid valve under part number 35547. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MFH-5-1/2-S

Part number

35547

Product type

Solenoid Valve

Valve function

5/2-way, single solenoid

Type of actuation

Electrical

Construction width

52 mm

Standard nominal flow rate (standardised to DIN 1343)

3700 l/min

pneumatic working port

G1/2

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

0 bar … 8 bar