FESTO MHE2-M1H-3/2O-M7 196150 Solenoid Valve

The FESTO MHE2-M1H-3/2O-M7, part number 196150, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MHE2-M1H-3/2O-M7 Category: Tags: , , Brand:

Description

FESTO MHE2-M1H-3/2O-M7 196150 Solenoid Valve

The FESTO MHE2-M1H-3/2O-M7, part number 196150, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 3/2-way, single solenoid, open.
  • Type of actuation: Electrical.
  • Construction width: 10 mm.

Technical Data

Brand FESTO
Model MHE2-M1H-3/2O-M7
Part number 196150
Product type Solenoid Valve
Valve function 3/2-way, single solenoid, open
Type of actuation Electrical
Construction width 10 mm
Standard nominal flow rate (standardised to DIN 1343) 100 l/min
pneumatic working port M7
Operating voltage 24 V DC
Operating pressure -0.09 MPa … 0.8 MPa
Operating pressure -0.9 bar … 8 bar
Operating pressure -13.05 psi … 116 psi
Design Pressure relief poppet valve
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 2 mm
Grid dimension 14 mm
Note on grid dimension Minimum distance between the valves is 4 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Direct
Flow direction Reversible with restrictions
lap Underlap
Operating pressure, reversible -0.09 MPa … 0.1 MPa
Operating pressure, reversible -0.9 bar … 1 bar
Operating pressure, reversible -13.05 psi … 14.5 psi
Max. switching frequency 130 Hz
Switching time off 3.5 ms
Switching time on 7 ms
Duty cycle 100%
Characteristic coil data 24 V DC: 2.88 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 60 °C
Ambient temperature -5 °C … 60 °C
Product weight 60 g
Electrical connection 2-pin Plug
Type of mounting With through-hole
Pneumatic connection, port 11 M7
Pneumatic connection, port 2 M7
Pneumatic port 33 M7
Material seals HNBR NBR
Material housing Die-cast zinc, coated
Material screws Galvanised steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MHE2-M1H-3/2O-M7, part number 196150, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MHE2-M1H-3/2O-M7 as a solenoid valve under part number 196150. It lists valve function as 3/2-way, single solenoid, open. Confirm the full variant before ordering.

Application Review

When considering this solenoid valve for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

MHE2-M1H-3/2O-M7

Part number

196150

Product type

Solenoid Valve

Valve function

3/2-way, single solenoid, open

Type of actuation

Electrical

Construction width

10 mm

Standard nominal flow rate (standardised to DIN 1343)

100 l/min

pneumatic working port

M7

Operating voltage

24 V DC

Operating pressure

-0.9 bar … 8 bar