FESTO MHE4-MS1H-3/2G-1/4-K 525189 Solenoid Valve

The FESTO MHE4-MS1H-3/2G-1/4-K, part number 525189, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MHE4-MS1H-3/2G-1/4-K Category: Tags: , , Brand:

Description

FESTO MHE4-MS1H-3/2G-1/4-K 525189 Solenoid Valve

The FESTO MHE4-MS1H-3/2G-1/4-K, part number 525189, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 3/2-way, single solenoid, closed.
  • Type of actuation: Electrical.
  • Construction width: 18 mm.

Technical Data

Brand FESTO
Model MHE4-MS1H-3/2G-1/4-K
Part number 525189
Product type Solenoid Valve
Valve function 3/2-way, single solenoid, closed
Type of actuation Electrical
Construction width 18 mm
Standard nominal flow rate (standardised to DIN 1343) 400 l/min
pneumatic working port G1/4
Operating voltage 24 V DC
Operating pressure -0.09 MPa … 0.8 MPa
Operating pressure -0.9 bar … 8 bar
Operating pressure -13.05 psi … 116 psi
Design Pressure relief poppet valve
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 4 mm
Grid dimension 24 mm
Note on grid dimension Minimum distance between the valves is 6 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Direct
Flow direction Reversible with restrictions
lap Underlap
Reverse polarity protection Bipolar
Additional functions Spark arresting Holding current reduction Protective circuit
Operating pressure, reversible -0.09 MPa … 0.1 MPa
Operating pressure, reversible -0.9 bar … 1 bar
Operating pressure, reversible -13.05 psi … 14.5 psi
Max. switching frequency 210 Hz
Switching time off 3.5 ms
Switching time on 3.5 ms
Tolerance switching time off +10 %/-40 %
Tolerance switching time on +10%/-30%
Switching time dispersion from 1 Hz 0.3 ms
Duty cycle 100%
Characteristic coil data 24 V DC: low-current phase 2.125 W, high-current phase 8.5 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 60 °C
Ambient temperature -5 °C … 60 °C
Product weight 270 g
Electrical connection Cable
Cable length 2.5 m
Type of mounting With through-hole
Pneumatic connection, port 1 G1/4
Pneumatic connection, port 2 G1/4
Pneumatic connection, port 3 G1/4
Material seals HNBR NBR
Material housing Die-cast zinc, coated
Material cable sheath PUR
Material screws Galvanised steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MHE4-MS1H-3/2G-1/4-K, part number 525189, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MHE4-MS1H-3/2G-1/4-K as a solenoid valve under part number 525189. It lists valve function as 3/2-way, single solenoid, closed. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MHE4-MS1H-3/2G-1/4-K

Part number

525189

Product type

Solenoid Valve

Valve function

3/2-way, single solenoid, closed

Type of actuation

Electrical

Construction width

18 mm

Standard nominal flow rate (standardised to DIN 1343)

400 l/min

pneumatic working port

G1/4

Operating voltage

24 V DC

Operating pressure

-0.9 bar … 8 bar