FESTO MHE2-MS1H-3/2G-QS-4-K 196137 Solenoid Valve
The FESTO MHE2-MS1H-3/2G-QS-4-K, part number 196137, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MHE2-MS1H-3/2G-QS-4-K 196137 Solenoid Valve
The FESTO MHE2-MS1H-3/2G-QS-4-K, part number 196137, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 3/2-way, single solenoid, closed.
- Type of actuation: Electrical.
- Construction width: 10 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MHE2-MS1H-3/2G-QS-4-K |
| Part number | 196137 |
| Product type | Solenoid Valve |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 100 l/min |
| pneumatic working port | QS-4 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.09 MPa … 0.8 MPa |
| Operating pressure | -0.9 bar … 8 bar |
| Operating pressure | -13.05 psi … 116 psi |
| Design | Pressure relief poppet valve |
| Type of reset | Mechanical spring |
| Degree of protection | IP55 |
| Nominal size | 2 mm |
| Grid dimension | 14 mm |
| Note on grid dimension | Minimum distance between the valves is 4 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Reversible with restrictions |
| lap | Underlap |
| Reverse polarity protection | Bipolar |
| Additional functions | Spark arresting Holding current reduction Protective circuit |
| Operating pressure, reversible | -0.09 MPa … 0.1 MPa |
| Operating pressure, reversible | -0.9 bar … 1 bar |
| Operating pressure, reversible | -13.05 psi … 14.5 psi |
| Max. switching frequency | 330 Hz |
| Switching time off | 2 ms |
| Switching time on | 1.7 ms |
| Tolerance switching time off | +10%/-30% |
| Tolerance switching time on | +10%/-30% |
| Switching time dispersion from 1 Hz | 0.2 ms |
| Duty cycle | 100% |
| Characteristic coil data | 24 V DC: low-current phase 1.25 W, high-current phase 5.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for environmental and media temperature | As a function of switching frequency (see graph) |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | -5 °C … 60 °C |
| Ambient temperature | -5 °C … 60 °C |
| Product weight | 60 g |
| Electrical connection | Cable |
| Cable length | 2.5 m |
| Type of mounting | With through-hole |
| Pneumatic connection, port 1 | QS-4 |
| Pneumatic connection, port 2 | QS-4 |
| Pneumatic connection, port 3 | QS-4 |
| Material seals | HNBR NBR |
| Material housing | Die-cast zinc, coated |
| Material cable sheath | PUR |
| Material screws | Galvanised steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MHE2-MS1H-3/2G-QS-4-K, part number 196137, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MHE2-MS1H-3/2G-QS-4-K as a solenoid valve under part number 196137. It lists valve function as 3/2-way, single solenoid, closed. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MHE2-MS1H-3/2G-QS-4-K |
| Part number | 196137 |
| Product type | Solenoid Valve |
| Valve function | 3/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 100 l/min |
| pneumatic working port | QS-4 |
| Operating voltage | 24 V DC |
| Operating pressure | -0.9 bar … 8 bar |






