FESTO MN1H-5/3G-D-3-C 159705 Solenoid Valve
The FESTO MN1H-5/3G-D-3-C, part number 159705, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MN1H-5/3G-D-3-C 159705 Solenoid Valve
The FESTO MN1H-5/3G-D-3-C, part number 159705, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/3 closed.
- Type of actuation: Electric.
- Construction width: 65 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MN1H-5/3G-D-3-C |
| Part number | 159705 |
| Product type | Solenoid Valve |
| Valve function | 5/3 closed |
| Type of actuation | Electric |
| Construction width | 65 mm |
| Standard nominal ow rate (standardised to DIN 1343) | 4100 l/min |
| pneumatic working port | Sub-base size 3 to ISO 5599-1 G1/2 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 0.3 MPa…1 MPa 3 bar…10 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Maritime classication | See certicate |
| Certicate issuing authority | DNV-TAA000032X UL MH19482 |
| Degree of protection | IP65 |
| Nominal size | 14.5 mm |
| Grid dimension | 71 mm |
| Exhaust-air function | With ow control option |
| Sealing principle | Soft |
| Mounting position | optional |
| Manual override | Detenting via accessory Non-detenting |
| ISO code | 356 |
| Type of piloting | Pilot actuated |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Overlap |
| Suitability for vacuum | no |
| Switching time off | 82 ms |
| Switching time on | 33 ms |
| Max. positive test pulse with 0 signal | 3700 µs |
| Max. negative test pulse with 1 signal | 4600 µs |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Media temperature | -5 °C…50 °C |
| Sound pressure level | 85 dB(A) |
| Ambient temperature | -5 °C…50 °C |
| Product weight | 1170 g |
| Electrical connection | Via N1 coil, to be ordered separately |
| Type of mounting | On sub-base Via through-hole and screw |
| Pilot exhaust port 82 | M5 |
| Pilot exhaust port 84 | M5 |
| Pneumatic connection, port 1 | Sub-base size 3 to ISO 5599-1 |
| Pneumatic connection, port 2 | Sub-base size 3 to ISO 5599-1 |
| Pneumatic connection, port 3 | Sub-base size 3 to ISO 5599-1 |
| Pneumatic connection, port 4 | Sub-base size 3 to ISO 5599-1 |
| Pneumatic connection, port 5 | Sub-base size 3 to ISO 5599-1 |
| Material seals | HNBR NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MN1H-5/3G-D-3-C, part number 159705, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MN1H-5/3G-D-3-C as a solenoid valve under part number 159705. It lists valve function as 5/3 closed. Confirm the full variant before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MN1H-5/3G-D-3-C |
| Part number | 159705 |
| Product type | Solenoid Valve |
| Valve function | 5/3 closed |
| Type of actuation | Electric |
| Construction width | 65 mm |
| Standard nominal ow rate (standardised to DIN 1343) | 4100 l/min |
| pneumatic working port | Sub-base size 3 to ISO 5599-1 G1/2 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 0.3 MPa…1 MPa 3 bar…10 bar |
| Design | Piston gate valve |






