FESTO MN1H-2-1/2-MS 161728 Solenoid Valve
The FESTO MN1H-2-1/2-MS, part number 161728, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MN1H-2-1/2-MS 161728 Solenoid Valve
The FESTO MN1H-2-1/2-MS, part number 161728, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Design: Diaphragm valve.
- Type of actuation: Electrical.
- Sealing principle: Soft.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MN1H-2-1/2-MS |
| Part number | 161728 |
| Product type | Solenoid Valve |
| Design | Diaphragm valve |
| Type of actuation | Electrical |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of mounting | Inline installation |
| Connection Process valve | G1/2 |
| Electrical connection | Plug To DIN EN 175301-803 Square design |
| Nominal size | 13 mm |
| Valve function | 2/2-way, single solenoid, closed |
| Manual override | Detenting via accessory Non-detenting |
| Flow direction | Non-reversible |
| Medium | Filtered compressed air, grade of filtration 200 µm |
| Exhaust-air function | Cannot be throttled |
| Characteristic coil data | 230 V AC: 50 Hz, pick-up power 5.0 VA, holding power 3.7 VA 230 V AC: 60 Hz, pick-up power 5.0 VA, holding power 3.7 VA 24 V DC: 2.5 W |
| Type of reset | Pneumatic spring |
| Type of piloting | Piloted |
| Medium pressure | 0.5 bar … 10 bar |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Media temperature | -10 °C … 60 °C |
| Ambient temperature | -10 °C … 60 °C |
| Standard nominal flow rate (standardised to DIN 1343) | 3100 l/min |
| Switching time on | 30 ms |
| Switching time off | 100 ms |
| Material housing | Brass |
| Material screws | High-alloy stainless steel |
| Material number screw | 1,4301 |
| Product weight | 400 g |
| Degree of protection | IP65 With plug socket |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MN1H-2-1/2-MS, part number 161728, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MN1H-2-1/2-MS as a solenoid valve under part number 161728. It lists design as Diaphragm valve. Confirm the full variant before ordering.
Full Model Verification
Use the full model code when confirming FESTO MN1H-2-1/2-MS 161728 Solenoid Valve. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MN1H-2-1/2-MS |
| Part number | 161728 |
| Product type | Solenoid Valve |
| Design | Diaphragm valve |
| Type of actuation | Electrical |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of mounting | Inline installation |
| Connection Process valve | G1/2 |
| Electrical connection | Plug To DIN EN 175301-803 Square design |
| Nominal size | 13 mm |







