FESTO MLO-POT-750-TLF 152631 Displacement Encoder
The FESTO MLO-POT-750-TLF, part number 152631, is a displacement encoder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MLO-POT-750-TLF 152631 Displacement Encoder
The FESTO MLO-POT-750-TLF, part number 152631, is a displacement encoder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Functional principle of measuring system: Analogue.
- Ambient temperature: -30 °C … 100 °C.
- Recommended wiper current: <1 µA.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MLO-POT-750-TLF |
| Part number | 152631 |
| Product type | Displacement Encoder |
| Functional principle of measuring system | Analogue |
| Ambient temperature | -30 °C … 100 °C |
| Recommended wiper current | <1 µA |
| Max. wiper current, short-time | 10000 µA |
| Max. travel speed | 10 m/s |
| Max. travel acceleration | 200 m/s² |
| Displacement resolution | 0.01 mm |
| Non-dependent linearity | 0.04 % |
| Temperature coefficient | 5 ppm/K |
| Stroke | 750 mm |
| Output signal | Analogue |
| Connection resistance | 10 kOhm |
| Connection resistance tolerance | 20 % |
| Nominal operating voltage DC | 10 V |
| Max. operating voltage DC | 42 V |
| Permissible voltage fluctuations | <1% |
| Max. current consumption | 4 mA |
| Electrical connection | Plug To DIN 43650 Square design |
| Design | With cover strip With sliding carriage Open profile |
| Parallel offset of coupling | ± 1.5 mm |
| Angle offset of driver | ±1° |
| Mounting position | Any |
| Product weight | 1800 g |
| Material housing | anodised |
| Material covering | Steel |
| Material slide housing | Die-cast aluminium Polymer |
| Material slide coupling | Steel |
| Material cover | Polymer |
| Material mounting clips | PEI |
| Degree of protection at top | To IEC 60529 |
| Degree of protection at bottom | To IEC 60529 |
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MLO-POT-750-TLF, part number 152631, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MLO-POT-750-TLF as a displacement encoder under part number 152631. It lists functional principle of measuring system as Analogue. Confirm the full variant before ordering.
Replacement Compatibility
Before ordering FESTO MLO-POT-750-TLF 152631 Displacement Encoder as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | MLO-POT-750-TLF |
| Part number | 152631 |
| Product type | Displacement Encoder |
| Functional principle of measuring system | Analogue |
| Ambient temperature | -30 °C … 100 °C |
| Recommended wiper current | <1 µA |
| Max. wiper current, short-time | 10000 µA |
| Max. travel speed | 10 m/s |
| Max. travel acceleration | 200 m/s² |
| Displacement resolution | 0.01 mm |
| Non-dependent linearity | 0.04 % |








