FESTO MN1H-5/2-D-1-FR-C 159687 Solenoid Valve

The FESTO MN1H-5/2-D-1-FR-C, part number 159687, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MN1H-5/2-D-1-FR-C Category: Tags: , , Brand:

Description

FESTO MN1H-5/2-D-1-FR-C 159687 Solenoid Valve

The FESTO MN1H-5/2-D-1-FR-C, part number 159687, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, single solenoid.
  • Type of actuation: Electrical.
  • Construction width: 42 mm.

Technical Data

Brand FESTO
Model MN1H-5/2-D-1-FR-C
Part number 159687
Product type Solenoid Valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Construction width 42 mm
Standard nominal ow rate (standardised to DIN 1343) 1200 l/min
pneumatic working port Sub-base size 1 to ISO 5599-1 G1/4
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.3 MPa…1 MPa 3 bar…10 bar
Design Piston gate valve
Type of reset Mechanical spring
Maritime classication See certicate
Certicate issuing authority DNV-TAA000032X UL MH19482
Degree of protection IP65
Nominal size 8 mm
Grid dimension 43 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting via accessory Non-detenting
ISO code 152
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Suitability for vacuum No
Switching time off 39 ms
Switching time on 17 ms
Max. positive test pulse with 0 signal 3700 µs
Max. negative test pulse with 1 signal 4600 µs
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Media temperature -5 °C…50 °C
Sound pressure level 85 dB(A)
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C…50 °C
Product weight 450 g
Electrical connection Via N1 coil, to be ordered separately
Type of mounting On sub-base With through-hole
Pilot exhaust port 84 M5
Pilot air port 12 Sub-base size 1 to ISO 5599-1
Pilot air port 14 Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 1 Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 2 Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 3 Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 4 Sub-base size 1 to ISO 5599-1
Pneumatic connection, port 5 Sub-base size 1 to ISO 5599-1
Material seals HNBR NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MN1H-5/2-D-1-FR-C, part number 159687, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MN1H-5/2-D-1-FR-C as a solenoid valve under part number 159687. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MN1H-5/2-D-1-FR-C

Part number

159687

Product type

Solenoid Valve

Valve function

5/2-way, single solenoid

Type of actuation

Electrical

Construction width

42 mm

Standard nominal ow rate (standardised to DIN 1343)

1200 l/min

pneumatic working port

Sub-base size 1 to ISO 5599-1 G1/4

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

0.3 MPa…1 MPa 3 bar…10 bar

Design

Piston gate valve