FESTO MS6-LFR-1/2-D7-ERM-AS 529188 Filter Regulator
The FESTO MS6-LFR-1/2-D7-ERM-AS, part number 529188, is a filter regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MS6-LFR-1/2-D7-ERM-AS 529188 Filter Regulator
The FESTO MS6-LFR-1/2-D7-ERM-AS, part number 529188, is a filter regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: 6.
- Series: MS.
- Actuator lock: Rotary knob with detent can be closed with accessories.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MS6-LFR-1/2-D7-ERM-AS |
| Part number | 529188 |
| Product type | Filter Regulator |
| Size | 6 |
| Series | MS |
| Actuator lock | Rotary knob with detent can be closed with accessories |
| Mounting position | Vertical +/-5° |
| Grade of filtration | 40 µm |
| Condensate drain | Manual, rotating |
| Design | Filter regulator with pressure gauge |
| Max. condensate volume | 38 ml |
| Controller function | Output pressure constant With secondary exhausting |
| Bowl guard | Plastic bowl guard |
| Degree of condensate separation | >75 % |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | With pressure gauge |
| Operating pressure | 0.08 MPa … 2 MPa |
| Operating pressure | 0.8 bar … 20 bar |
| Pressure regulation range | 0.5 bar … 12 bar |
| Max. pressure hysteresis | 0.025 MPa |
| Max. pressure hysteresis | 0.25 bar |
| Max. pressure hysteresis | 3.625 psi |
| Standard nominal flow rate (standardised to DIN 1343) | 4500 l/min |
| Operating medium | Compressed air to ISO 8573-1:2010 [-:4:-] Inert gas |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Storage temperature | -10 °C … 60 °C |
| Suitable for use with food | See supplementary material information |
| Air purity class at output | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Media temperature | -10 °C … 60 °C |
| Ambient temperature | -10 °C … 60 °C |
| Pore size | <40 µm |
| Product weight | 875 g |
| Type of mounting | Either: Front panel mounting Inline installation With accessories |
| Pneumatic connection, port 1 | G1/2 |
| Pneumatic connection, port 2 | G1/2 |
| Material control panel | PA POM |
| Material seals | NBR |
| Material filter | Packaging unit |
| Material housing | Die-cast aluminium |
| Material membrane | NBR |
| Material bowl | Makrolon® |
| Material separating plate | POM |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MS6-LFR-1/2-D7-ERM-AS, part number 529188, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MS6-LFR-1/2-D7-ERM-AS as a filter regulator under part number 529188. It lists size as 6. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | MS6-LFR-1/2-D7-ERM-AS |
| Part number | 529188 |
| Product type | Filter Regulator |
| Size | 6 |
| Series | MS |
| Actuator lock | Rotary knob with detent can be closed with accessories |
| Mounting position | Vertical +/-5° |
| Grade of filtration | 40 µm |
| Condensate drain | Manual, rotating |
| Design | Filter regulator with pressure gauge |
| Max. condensate volume | 38 ml |





