FESTO MVH-5-1/8-B 19779 Solenoid Valve

The FESTO MVH-5-1/8-B, part number 19779, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MVH-5-1/8-B Category: Tags: , , Brand:

Description

FESTO MVH-5-1/8-B 19779 Solenoid Valve

The FESTO MVH-5-1/8-B, part number 19779, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, single solenoid.
  • Type of actuation: Electrical.
  • Construction width: 26 mm.

Technical Data

Brand FESTO
Model MVH-5-1/8-B
Part number 19779
Product type Solenoid Valve
Valve function 5/2-way, single solenoid
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 750 l/min
pneumatic working port G1/8
Operating voltage 24 V DC
Operating pressure 0.2 MPa … 1 MPa
Operating pressure 2 bar … 10 bar
Design Poppet seat
Type of reset Mechanical spring
Nominal size 5 mm
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Underlap
b value 0.34
C value 3 l/sbar
Max. switching frequency 3 Hz
Switching time off 36 ms
Switching time on 20 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Characteristic coil data 24 V DC: 2.5 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -40 °C … 60 °C
Media temperature -5 °C … 50 °C
Ambient temperature -5 °C … 50 °C
Product weight 230 g
Type of mounting Either: On PR rail With through-hole
Pilot exhaust port 84 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Material seals NBR TPE-U(PU)
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MVH-5-1/8-B, part number 19779, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MVH-5-1/8-B as a solenoid valve under part number 19779. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MVH-5-1/8-B

Part number

19779

Product type

Solenoid Valve

Valve function

5/2-way, single solenoid

Type of actuation

Electrical

Construction width

26 mm

Standard nominal flow rate (standardised to DIN 1343)

750 l/min

pneumatic working port

G1/8

Operating voltage

24 V DC

Operating pressure

2 bar … 10 bar