FESTO NPQH-T-G14-Q10-P10 578397 Push-In T-Fitting

The FESTO NPQH-T-G14-Q10-P10, part number 578397, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: NPQH-T-G14-Q10-P10 Category: Tags: , , Brand:

Description

FESTO NPQH-T-G14-Q10-P10 578397 Push-In T-Fitting

The FESTO NPQH-T-G14-Q10-P10, part number 578397, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 8 mm.
  • Tubing insertion depth: 18.3 mm.

Technical Data

Brand FESTO
Model NPQH-T-G14-Q10-P10
Part number 578397
Product type Push-In T-Fitting
Size Standard
Nominal size 8 mm
Tubing insertion depth 18.3 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design T-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 2 MPa
Operating pressure complete temperature range -0.95 bar … 20 bar
Operating pressure complete temperature range -13.775 psi … 290 psi
Note on operating pressure Water: max. 0.6 MPa at 0 – 50 °C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 3 – high corrosion stress
Suitable for use with food See declaration of conformity NSF/ANSI 169
Ambient temperature 0 °C … 150 °C
Nominal torque 7.5 Nm
Tolerance for nominal tightening torque ±20%
Product weight 44.4 g
Type of mounting External hex SW16
Pneumatic connection, port 1 Male thread G1/4
Pneumatic connection, port 2 For tubing outside diameter of 10 mm
Colour of release ring Silver
Material housing Brass, chemically nickel-plated
Material thread seal Fluoro rubber
Guard ring material PEI
Material release ring Chemically nickel-plated brass
Material tubing seal Fluoro rubber
Material tubing clamp component High-alloy stainless steel
Thrust ring material PEI

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model NPQH-T-G14-Q10-P10, part number 578397, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies NPQH-T-G14-Q10-P10 as a push-in t-fitting under part number 578397. It lists size as Standard. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

NPQH-T-G14-Q10-P10

Part number

578397

Product type

Push-In T-Fitting

Size

Standard

Nominal size

8 mm

Tubing insertion depth

18.3 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 2 MPa