FESTO OVEM-05-H-B-QO-CE-N-1P 540021 Vacuum Generator
The FESTO OVEM-05-H-B-QO-CE-N-1P, part number 540021, is a vacuum generator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO OVEM-05-H-B-QO-CE-N-1P 540021 Vacuum Generator
The FESTO OVEM-05-H-B-QO-CE-N-1P, part number 540021, is a vacuum generator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Nominal size, Laval nozzle: 0.45 mm.
- Grid dimension: 20 mm.
- Silencer design: Open.
Technical Data
| Brand | FESTO |
|---|---|
| Model | OVEM-05-H-B-QO-CE-N-1P |
| Part number | 540021 |
| Product type | Vacuum Generator |
| Nominal size, Laval nozzle | 0.45 mm |
| Grid dimension | 20 mm |
| Silencer design | Open |
| Mounting position | Any |
| Ejector characteristic | High vacuum Standard |
| Grade of filtration | 40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Open silencer Vacuum switch |
| Design | Modular |
| Short circuit current rating | Yes |
| Measured variable | Relative pressure |
| Measuring principle | Piezoresistive |
| Switching element function | N/O contact |
| Switching function | Threshold value comparator Threshold value with fixed hysteresis |
| Valve function | Closed |
| Reverse polarity protection | For all electrical connections |
| Standard switching input | IEC 61131-2 |
| Display type | LED |
| Setting options | Teach-in |
| Switching position indicator | LED |
| Switching status indication | Optical |
| Setting range threshold value | -1 bar … 0 bar |
| Operating pressure | 2 bar … 8 bar |
| Operating pressure for max. vacuum | 5.1 bar |
| Max. vacuum | 93 % |
| Nominal operating pressure | 6 bar |
| Max. suction flow rate against atmosphere | 6 l/min |
| Air supply time at nominal operating pressure | 2 s |
| Operational voltage range DC | 20.4 V … 27.6 V |
| Duty cycle | 100% |
| Inductive protective circuit | Adapted to MZ, MY, ME coils |
| Insulation voltage | 50 V |
| No-load supply current | <80 mA |
| Max. output current | 100 mA |
| Off-state current | 0.1 mA |
| Switching output | PNP |
| Voltage drop | ≤1.5 V |
| Characteristic coil data | 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W |
| Immunity to surge | 0.8 kV |
| Overload protection | Available |
| Pollution degree | 3 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | 0 °C … 50 °C |
| Relative air humidity | 5 – 85% |
| Sound pressure level at nominal operating pressure | 51 dB(A) |
| Degree of protection | IP65 |
| Protection class | III |
| Ambient temperature | 0 °C … 50 °C |
| Max. tightening torque | 0.8 Nm with female thread 2.5 Nm with through-hole |
| Product weight | 315 g |
| Pressure measuring range | -1 bar … 0 bar |
| Accuracy in ± % FS | 0.5 %FS |
| Hysteresis | 0.02 bar |
| Reproducibility of switching values FS | 0.6 % |
| Switching logic for inputs | PNP (positive switching) |
| Electrical connection | M12x1 Plug |
| Type of mounting | With through-hole With female thread With accessories |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 3 | Integrated silencer |
| Vacuum connection | QS-6 |
| Material seals | NBR |
| Material receiver nozzle | POM |
| Material filter | Fabric PA Sintered steel |
| Material filter housing | Reinforced PA |
| Material housing | Die-cast aluminium Reinforced PA |
| Material adjusting screw | Steel |
| Material silencer | Wrought aluminium alloy Polyurethane foam |
| Material screws | Steel |
| Material connector housing | Brass, nickel-plated |
| Material electrical contact | Gold-plated brass |
| Material pins | Steel |
| Material transmitter nozzle | Wrought aluminium alloy |
| Material keypad | Reinforced PA |
| Material fitting | Brass, nickel-plated |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model OVEM-05-H-B-QO-CE-N-1P, part number 540021, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies OVEM-05-H-B-QO-CE-N-1P as a vacuum generator under part number 540021. It lists nominal size, laval nozzle as 0.45 mm. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | OVEM-05-H-B-QO-CE-N-1P |
| Part number | 540021 |
| Product type | Vacuum Generator |
| Nominal size, Laval nozzle | 0.45 mm |
| Grid dimension | 20 mm |
| Silencer design | Open |
| Mounting position | Any |
| Ejector characteristic | High vacuum Standard |
| Grade of filtration | 40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Open silencer Vacuum switch |





