FESTO PAN-4X0,75-NT 546284 Plastic Tubing
The FESTO PAN-4X0,75-NT, part number 546284, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO PAN-4X0,75-NT 546284 Plastic Tubing
The FESTO PAN-4X0,75-NT, part number 546284, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Outside diameter: 4 mm.
- Flow-relevant bending radius: 18 mm.
- Inside diameter: 2.9 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | PAN-4X0,75-NT |
| Part number | 546284 |
| Product type | Plastic Tubing |
| Outside diameter | 4 mm |
| Flow-relevant bending radius | 18 mm |
| Inside diameter | 2.9 mm |
| Min. bending radius | 12 mm |
| Tubing characteristics | Suitable for energy chains |
| Temperature-dependent operating pressure | -0.095 MPa … 1.5 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 15 bar |
| Temperature-dependent operating pressure | -13.775 psi … 217.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Ambient temperature | -30 °C … 80 °C |
| Product weight according to length | 0.006 kg/m |
| Pneumatic connection | For push-in connector O.D. 4 mm For barbed fitting I.D. 3 mm with union nut For barbed fitting I.D. 3 mm |
| Colour | Natural |
| Shore hardness | D 55 +/-3 |
| Material tubing | TPE-A |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model PAN-4X0,75-NT, part number 546284, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies PAN-4X0,75-NT as a plastic tubing under part number 546284. It lists outside diameter as 4 mm. Confirm the full variant before ordering.
Operating Conditions Check
Before selecting PAN-4X0,75-NT, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | PAN-4X0,75-NT |
| Part number | 546284 |
| Product type | Plastic Tubing |
| Outside diameter | 4 mm |
| Flow-relevant bending radius | 18 mm |
| Inside diameter | 2.9 mm |
| Min. bending radius | 12 mm |
| Tubing characteristics | Suitable for energy chains |
| Temperature-dependent operating pressure | -13.775 psi … 217.5 psi |







