FESTO PLN-10X1,5-NT 193406 Plastic Tubing
The FESTO PLN-10X1,5-NT, part number 193406, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO PLN-10X1,5-NT 193406 Plastic Tubing
The FESTO PLN-10X1,5-NT, part number 193406, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Outside diameter: 10 mm.
- Flow-relevant bending radius: 57 mm.
- Inside diameter: 7 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | PLN-10X1,5-NT |
| Part number | 193406 |
| Product type | Plastic Tubing |
| Outside diameter | 10 mm |
| Flow-relevant bending radius | 57 mm |
| Inside diameter | 7 mm |
| Min. bending radius | 22 mm |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.8 MPa at 0 – 50 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Suitable for use with food | See supplementary material information |
| Ambient temperature | -30 °C … 80 °C |
| Product weight according to length | 0.0375 kg/m |
| Pneumatic connection | For push-in connector O.D. 10 mm |
| Colour | Natural |
| Material tubing | Packaging unit |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model PLN-10X1,5-NT, part number 193406, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies PLN-10X1,5-NT as a plastic tubing under part number 193406. It lists outside diameter as 10 mm. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | PLN-10X1,5-NT |
| Part number | 193406 |
| Product type | Plastic Tubing |
| Outside diameter | 10 mm |
| Flow-relevant bending radius | 57 mm |
| Inside diameter | 7 mm |
| Min. bending radius | 22 mm |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.8 MPa at 0 – 50 °C |







