FESTO PLN-6X1-NT 193404 Plastic Tubing

The FESTO PLN-6X1-NT, part number 193404, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: PLN-6X1-NT Category: Tags: , , Brand:

Description

FESTO PLN-6X1-NT 193404 Plastic Tubing

The FESTO PLN-6X1-NT, part number 193404, is a plastic tubing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Outside diameter: 6 mm.
  • Flow-relevant bending radius: 32 mm.
  • Inside diameter: 4 mm.

Technical Data

Brand FESTO
Model PLN-6X1-NT
Part number 193404
Product type Plastic Tubing
Outside diameter 6 mm
Flow-relevant bending radius 32 mm
Inside diameter 4 mm
Min. bending radius 11 mm
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.8 MPa at 0 – 50 °C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Suitable for use with food See supplementary material information
Ambient temperature -30 °C … 80 °C
Product weight according to length 0.0147 kg/m
Pneumatic connection For push-in connector O.D. 6 mm For barbed fitting I.D. 4 mm with union nut For barbed fitting I.D. 4 mm
Colour Natural
Material tubing Packaging unit

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model PLN-6X1-NT, part number 193404, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies PLN-6X1-NT as a plastic tubing under part number 193404. It lists outside diameter as 6 mm. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

PLN-6X1-NT

Part number

193404

Product type

Plastic Tubing

Outside diameter

6 mm

Flow-relevant bending radius

32 mm

Inside diameter

4 mm

Min. bending radius

11 mm

Temperature-dependent operating pressure

-13.775 psi … 203 psi

Note on operating pressure

Water: max. 0.8 MPa at 0 – 50 °C