FESTO QS-10-8 153039 Push-In Connector
The FESTO QS-10-8, part number 153039, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QS-10-8 153039 Push-In Connector
The FESTO QS-10-8, part number 153039, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 6.5 mm.
- Tubing insertion depth: 20.2 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-10-8 |
| Part number | 153039 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 6.5 mm |
| Tubing insertion depth | 20.2 mm |
| Note on the tubing insertion depth | Ø8 depth 18.1 mm Ø10 depth 20.2 mm |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 14 g |
| Pneumatic connection, port 1 | For tubing outer diameter of 10 mm |
| Pneumatic connection, port 2 | For tubing outside diameter of 8 mm |
| Colour of release ring | Blue |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QS-10-8, part number 153039, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QS-10-8 as a push-in connector under part number 153039. It lists size as Standard. Confirm the full variant before ordering.
Maintenance Inspection
Before replacing QS-10-8, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-10-8 |
| Part number | 153039 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 6.5 mm |
| Tubing insertion depth | 20.2 mm |
| Note on the tubing insertion depth | Ø8 depth 18.1 mm Ø10 depth 20.2 mm |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |






