FESTO QS-10H-8 153043 Push-In Connector

The FESTO QS-10H-8, part number 153043, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QS-10H-8 Category: Tags: , , Brand:

Description

FESTO QS-10H-8 153043 Push-In Connector

The FESTO QS-10H-8, part number 153043, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 5.4 mm.
  • Tubing insertion depth: 18.1 mm.

Technical Data

Brand FESTO
Model QS-10H-8
Part number 153043
Product type Push-In Connector
Size Standard
Nominal size 5.4 mm
Tubing insertion depth 18.1 mm
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 5.8 g
Pneumatic connection, port 1 Push-in sleeve Ø 10 mm
Pneumatic connection, port 2 For tubing outside diameter of 8 mm
Colour of release ring Blue
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QS-10H-8, part number 153043, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QS-10H-8 as a push-in connector under part number 153043. It lists size as Standard. Confirm the full variant before ordering.

Maintenance Inspection

Before replacing QS-10H-8, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

QS-10H-8

Part number

153043

Product type

Push-In Connector

Size

Standard

Nominal size

5.4 mm

Tubing insertion depth

18.1 mm

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.95 bar … 6 bar