FESTO QS-12-10 153040 Push-In Connector
The FESTO QS-12-10, part number 153040, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QS-12-10 153040 Push-In Connector
The FESTO QS-12-10, part number 153040, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 9 mm.
- Tubing insertion depth: 23.4 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-12-10 |
| Part number | 153040 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 9 mm |
| Tubing insertion depth | 23.4 mm |
| Note on the tubing insertion depth | Ø10 depth 20 mm Ø12 depth 23.4 mm |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 21 g |
| Pneumatic connection, port 1 | For tubing outer diameter of 12 mm |
| Pneumatic connection, port 2 | For tubing outside diameter of 10 mm |
| Colour of release ring | Blue |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QS-12-10, part number 153040, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QS-12-10 as a push-in connector under part number 153040. It lists size as Standard. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-12-10 |
| Part number | 153040 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 9 mm |
| Tubing insertion depth | 23.4 mm |
| Note on the tubing insertion depth | Ø10 depth 20 mm Ø12 depth 23.4 mm |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |







