FESTO QS-1/8-4 153001 Push-In Fitting
The FESTO QS-1/8-4, part number 153001, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QS-1/8-4 153001 Push-In Fitting
The FESTO QS-1/8-4, part number 153001, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 3 mm.
- Tubing insertion depth: 14.9 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-1/8-4 |
| Part number | 153001 |
| Product type | Push-In Fitting |
| Size | Standard |
| Nominal size | 3 mm |
| Tubing insertion depth | 14.9 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 7.4 g |
| Type of mounting | External hex SW10 |
| Pneumatic connection, port 1 | Male thread R1/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 4 mm |
| Colour of release ring | Blue |
| Material housing | Brass, nickel-plated |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QS-1/8-4, part number 153001, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QS-1/8-4 as a push-in fitting under part number 153001. It lists size as Standard. Confirm the full variant before ordering.
Maintenance Inspection
Before replacing QS-1/8-4, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-1/8-4 |
| Part number | 153001 |
| Product type | Push-In Fitting |
| Size | Standard |
| Nominal size | 3 mm |
| Tubing insertion depth | 14.9 mm |
| Type of seal on screwed plug | Coating |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |









