FESTO QS-6-4-100 130691 Push-In Connector
The FESTO QS-6-4-100, part number 130691, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QS-6-4-100 130691 Push-In Connector
The FESTO QS-6-4-100, part number 130691, is a push-in connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 2.8 mm.
- Tubing insertion depth: 17 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-6-4-100 |
| Part number | 130691 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 2.8 mm |
| Tubing insertion depth | 17 mm |
| Note on the tubing insertion depth | Ø4 depth 14.9 mm Ø6 depth 17 mm |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 6.4 g |
| Pneumatic connection, port 1 | For tubing outside diameter of 6 mm |
| Pneumatic connection, port 2 | For tubing outside diameter of 4 mm |
| Colour of release ring | Blue |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QS-6-4-100, part number 130691, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QS-6-4-100 as a push-in connector under part number 130691. It lists size as Standard. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-6-4-100 |
| Part number | 130691 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 2.8 mm |
| Tubing insertion depth | 17 mm |
| Note on the tubing insertion depth | Ø4 depth 14.9 mm Ø6 depth 17 mm |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |






