FESTO QS-G1/4-8-I 186110 Push-In Fitting

The FESTO QS-G1/4-8-I, part number 186110, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QS-G1/4-8-I Category: Tags: , , Brand:

Description

FESTO QS-G1/4-8-I 186110 Push-In Fitting

The FESTO QS-G1/4-8-I, part number 186110, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 6.3 mm.
  • Tubing insertion depth: 18.2 mm.

Technical Data

Brand FESTO
Model QS-G1/4-8-I
Part number 186110
Product type Push-In Fitting
Size Standard
Nominal size 6.3 mm
Tubing insertion depth 18.2 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 9 Nm
Tolerance for nominal tightening torque ±20%
Product weight 14 g
Type of mounting Internal hexagon A/F 6
Pneumatic connection, port 1 Male thread G1/4
Pneumatic connection, port 2 For tubing outside diameter of 8 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QS-G1/4-8-I, part number 186110, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QS-G1/4-8-I as a push-in fitting under part number 186110. It lists size as Standard. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting QS-G1/4-8-I, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

QS-G1/4-8-I

Part number

186110

Product type

Push-In Fitting

Size

Standard

Nominal size

6.3 mm

Tubing insertion depth

18.2 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa