FESTO QS-G1/4-12 186350 Push-In Fitting
The FESTO QS-G1/4-12, part number 186350, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QS-G1/4-12 186350 Push-In Fitting
The FESTO QS-G1/4-12, part number 186350, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 8.5 mm.
- Tubing insertion depth: 23.3 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-G1/4-12 |
| Part number | 186350 |
| Product type | Push-In Fitting |
| Size | Standard |
| Nominal size | 8.5 mm |
| Tubing insertion depth | 23.3 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Nominal torque | 9 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 39 g |
| Type of mounting | External hex SW21 |
| Pneumatic connection, port 1 | Male thread G1/4 |
| Pneumatic connection, port 2 | For tubing outer diameter of 12 mm |
| Colour of release ring | Blue |
| Material housing | Brass, nickel-plated |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QS-G1/4-12, part number 186350, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QS-G1/4-12 as a push-in fitting under part number 186350. It lists size as Standard. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-G1/4-12 |
| Part number | 186350 |
| Product type | Push-In Fitting |
| Size | Standard |
| Nominal size | 8.5 mm |
| Tubing insertion depth | 23.3 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |







