FESTO QSL-G1/4-6 186118 Push-In L-Fitting

The FESTO QSL-G1/4-6, part number 186118, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QSL-G1/4-6 Category: Tags: , , Brand:

Description

FESTO QSL-G1/4-6 186118 Push-In L-Fitting

The FESTO QSL-G1/4-6, part number 186118, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 4.3 mm.
  • Tubing insertion depth: 17 mm.

Technical Data

Brand FESTO
Model QSL-G1/4-6
Part number 186118
Product type Push-In L-Fitting
Size Standard
Nominal size 4.3 mm
Tubing insertion depth 17 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design L-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 9 Nm
Tolerance for nominal tightening torque ±20%
Product weight 21 g
Type of mounting External hex SW17
Pneumatic connection, port 1 Male thread G1/4
Pneumatic connection, port 2 For tubing outside diameter of 6 mm
Colour of release ring Blue
Material screwed plug Nickel-plated brass
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QSL-G1/4-6, part number 186118, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QSL-G1/4-6 as a push-in l-fitting under part number 186118. It lists size as Standard. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

QSL-G1/4-6

Part number

186118

Product type

Push-In L-Fitting

Size

Standard

Nominal size

4.3 mm

Tubing insertion depth

17 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa