FESTO QSL-G1/2-12-20 132058 Push-In L-Fitting
The FESTO QSL-G1/2-12-20, part number 132058, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QSL-G1/2-12-20 132058 Push-In L-Fitting
The FESTO QSL-G1/2-12-20, part number 132058, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 10.3 mm.
- Tubing insertion depth: 23.4 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QSL-G1/2-12-20 |
| Part number | 132058 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 10.3 mm |
| Tubing insertion depth | 23.4 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Nominal torque | 26 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 67 g |
| Type of mounting | External hex SW25 |
| Pneumatic connection, port 1 | Male thread G1/2 |
| Pneumatic connection, port 2 | For tubing outer diameter of 12 mm |
| Colour of release ring | Blue |
| Material screwed plug | Nickel-plated brass |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QSL-G1/2-12-20, part number 132058, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QSL-G1/2-12-20 as a push-in l-fitting under part number 132058. It lists size as Standard. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | QSL-G1/2-12-20 |
| Part number | 132058 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 10.3 mm |
| Tubing insertion depth | 23.4 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |






