FESTO QSML-M3-4 153332 Push-In L-Fitting

The FESTO QSML-M3-4, part number 153332, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QSML-M3-4 Category: Tags: , , Brand:

Description

FESTO QSML-M3-4 153332 Push-In L-Fitting

The FESTO QSML-M3-4, part number 153332, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Mini.
  • Nominal size: 1.3 mm.
  • Tubing insertion depth: 11.6 mm.

Technical Data

Brand FESTO
Model QSML-M3-4
Part number 153332
Product type Push-In L-Fitting
Size Mini
Nominal size 1.3 mm
Tubing insertion depth 11.6 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design L-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 0.48 Nm
Tolerance for nominal tightening torque ±55%
Product weight 3 g
Type of mounting External hexagon, size 8 mm
Pneumatic connection, port 1 Male thread M3
Pneumatic connection, port 2 For tubing outside diameter of 4 mm
Colour of release ring Blue
Material screwed plug Nickel-plated brass
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QSML-M3-4, part number 153332, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QSML-M3-4 as a push-in l-fitting under part number 153332. It lists size as Mini. Confirm the full variant before ordering.

Full Model Verification

Use the full model code when confirming FESTO QSML-M3-4 153332 Push-In L-Fitting. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

QSML-M3-4

Part number

153332

Product type

Push-In L-Fitting

Size

Mini

Nominal size

1.3 mm

Tubing insertion depth

11.6 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa