FESTO QST-12-20 130806 Push-In T-Connector

The FESTO QST-12-20, part number 130806, is a push-in t-connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QST-12-20 Category: Tags: , , Brand:

Description

FESTO QST-12-20 130806 Push-In T-Connector

The FESTO QST-12-20, part number 130806, is a push-in t-connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 10 mm.
  • Tubing insertion depth: 22.9 mm.

Technical Data

Brand FESTO
Model QST-12-20
Part number 130806
Product type Push-In T-Connector
Size Standard
Nominal size 10 mm
Tubing insertion depth 22.9 mm
Mounting position Any
Design T-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 36 g
Number of outputs 2
Number of supply lines 1
Pneumatic connection, port 1 For tubing outer diameter of 12 mm
Pneumatic connection, port 2 For tubing outer diameter of 12 mm
Colour of release ring Blue
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QST-12-20, part number 130806, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QST-12-20 as a push-in t-connector under part number 130806. It lists size as Standard. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

QST-12-20

Part number

130806

Product type

Push-In T-Connector

Size

Standard

Nominal size

10 mm

Tubing insertion depth

22.9 mm

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.95 bar … 6 bar