FESTO QST-10-6 130614 Push-In T-Connector

The FESTO QST-10-6, part number 130614, is a push-in t-connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QST-10-6 Category: Tags: , , Brand:

Description

FESTO QST-10-6 130614 Push-In T-Connector

The FESTO QST-10-6, part number 130614, is a push-in t-connector. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 3.7 mm.
  • Tubing insertion depth: 20.2 mm.

Technical Data

Brand FESTO
Model QST-10-6
Part number 130614
Product type Push-In T-Connector
Size Standard
Nominal size 3.7 mm
Tubing insertion depth 20.2 mm
Note on the tubing insertion depth Ø6 depth 17 mm Ø10 depth 20.2 mm
Mounting position Any
Design T-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 22 g
Number of outputs 2
Number of supply lines 1
Pneumatic connection, port 1 For tubing outer diameter of 10 mm
Pneumatic connection, port 2 For tubing outside diameter of 6 mm
Colour of release ring Blue
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QST-10-6, part number 130614, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QST-10-6 as a push-in t-connector under part number 130614. It lists size as Standard. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

QST-10-6

Part number

130614

Product type

Push-In T-Connector

Size

Standard

Nominal size

3.7 mm

Tubing insertion depth

20.2 mm

Note on the tubing insertion depth

Ø6 depth 17 mm Ø10 depth 20.2 mm

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa