FESTO QST-1/2-10 190672 Push-In T-Fitting

The FESTO QST-1/2-10, part number 190672, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QST-1/2-10 Category: Tags: , , Brand:

Description

FESTO QST-1/2-10 190672 Push-In T-Fitting

The FESTO QST-1/2-10, part number 190672, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 8.3 mm.
  • Tubing insertion depth: 20.2 mm.

Technical Data

Brand FESTO
Model QST-1/2-10
Part number 190672
Product type Push-In T-Fitting
Size Standard
Nominal size 8.3 mm
Tubing insertion depth 20.2 mm
Type of seal on screwed plug Coating
Mounting position Any
Design T-shape
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 65 g
Number of outputs 2
Number of supply lines 1
Type of mounting External hex SW21
Pneumatic connection, port 1 Male thread R1/2
Pneumatic connection, port 2 For tubing outside diameter of 10 mm
Colour of release ring Blue
Material screwed plug Nickel-plated brass
Material housing PBT
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QST-1/2-10, part number 190672, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QST-1/2-10 as a push-in t-fitting under part number 190672. It lists size as Standard. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

QST-1/2-10

Part number

190672

Product type

Push-In T-Fitting

Size

Standard

Nominal size

8.3 mm

Tubing insertion depth

20.2 mm

Type of seal on screwed plug

Coating

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa