FESTO SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 8063974 Position Transmitter

The FESTO SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8, part number 8063974, is a position transmitter. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 Category: Tags: , , Brand:

Description

FESTO SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 8063974 Position Transmitter

The FESTO SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8, part number 8063974, is a position transmitter. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For T-slot.
  • Measured variable: Position.
  • Measuring principle: Magnetic Hall.

Technical Data

Brand FESTO
Model SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8
Part number 8063974
Product type Position Transmitter
Design For T-slot
Measured variable Position
Measuring principle Magnetic Hall
Sensing range ≤52000 µm
Ambient temperature -40 °C … 80 °C
Typical sampling interval 2 ms
Max. travel speed 3 m/s
Displacement resolution ≤0.02 mm
Repetition accuracy 0.2 mm
Switching output 2x PNP or 2x NPN, adjustable
Switching element function NC or NO, switchable
Switch-on time <4 ms
Switch-off time <4 ms
Max. switching frequency 125 Hz
Max. switching output voltage DC 30 V
Max. output current 50 mA
Max. switching capacity DC 1.5 W
Voltage drop <0.5 V
Typical linearity error ±1 mm
Short circuit current rating Yes
Overload protection Available
Protocol I-Port IO-Link®
IO-Link, Protocol version Device V 1.1
IO-Link, Profile Smart sensor profile
IO-Link, Function classes Process data variable (PDV) Identification Diagnostics Teach channel Switching signal channel (SSC)
IO-Link, communication mode COM2 (38.4 kBaud)
IO-Link, SIO-Mode support Yes
IO-Link, Port class A
IO-Link, Process data length IN 2 bytes
IO-Link, Process data content IN 12 bit PDV (measured position value) 4 bit SSC (Switching Signal)
IO-Link, Min. cycle time 2.5 ms
Operational voltage range DC 10 V … 30 V
Residual ripple 10%
No-load supply current <12 mA
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores 4
Electrical connection 1, type of mounting Screw-type lock
Electrical connection 1, connection pattern 00991171
Connection outlet orientation In-line
Material electrical contact Gold-plated copper alloy
Test conditions cable Bending strength: to Festo standard Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length 0.3 m
Cable characteristic Suitable for energy chains/robot applications
Cable sheath colour Grey
Material cable sheath TPE-U(PUR)
Type of mounting Screw-clamped Insertable in the slot from above
Mounting position Any
Product weight 9.5 g
Material housing High-alloy stainless steel
Material union nut Nickel-plated brass
Switching status indication Yellow LED
Status indication LED red
Setting options IO-Link® Capacitive pushbutton
Ambient temperature with moving cable -20 °C … 70 °C
Degree of protection IP65 IP68

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8, part number 8063974, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8 as a position transmitter under part number 8063974. It lists design as For T-slot. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8

Part number

8063974

Product type

Position Transmitter

Design

For T-slot

Measured variable

Position

Measuring principle

Magnetic Hall

Sensing range

≤52000 µm

Ambient temperature

-40 °C … 80 °C

Typical sampling interval

2 ms

Max. travel speed

3 m/s

Displacement resolution

≤0.02 mm