FESTO SME-10M-DS-24V-E-2,5-L-OE 551365 Proximity Sensor
The FESTO SME-10M-DS-24V-E-2,5-L-OE, part number 551365, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SME-10M-DS-24V-E-2,5-L-OE 551365 Proximity Sensor
The FESTO SME-10M-DS-24V-E-2,5-L-OE, part number 551365, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Design: For C-slot.
- Special characteristics: Oil-resistant.
- Measured variable: Position.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SME-10M-DS-24V-E-2,5-L-OE |
| Part number | 551365 |
| Product type | Proximity Sensor |
| Design | For C-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magnetic reed |
| Ambient temperature | -40 °C … 70 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | Contacting, bipolar |
| Switching element function | N/O contact |
| Switch-on time | ≤1.2 ms |
| Switch-off time | ≤1 ms |
| Max. switching frequency | 50 Hz |
| Max. output current | 300 mA |
| Max. output current using mounting kits | 50 mA |
| Max. switching capacity AC | 9 VA |
| Max. switching capacity DC | 9 W |
| Max. switching capacity DC using mounting kits | 1.5 W |
| Max. switching capacity AC using mounting kits | 1.5 VA |
| Voltage drop | ≤1.5 V |
| Short circuit current rating | No |
| Overload protection | No |
| Rated operational voltage DC | 24 V |
| Operational voltage range AC | 5 V … 30 V |
| Operational voltage range DC | 5 V … 30 V |
| Reverse polarity protection | No |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connector system | Open end |
| Electrical connection 1, number of connections/cores | 3 |
| Connection outlet orientation | In-line |
| Test conditions cable | Bending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 2.5 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Material cable sheath | TPE-U(PUR) |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.4 Nm |
| Mounting position | Any |
| Product weight | 16.8 g |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Ambient temperature with moving cable | -20 °C … 70 °C |
| Degree of protection | IP65 IP68 |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SME-10M-DS-24V-E-2,5-L-OE, part number 551365, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SME-10M-DS-24V-E-2,5-L-OE as a proximity sensor under part number 551365. It lists design as For C-slot. Confirm the full variant before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SME-10M-DS-24V-E-2,5-L-OE |
| Part number | 551365 |
| Product type | Proximity Sensor |
| Design | For C-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magnetic reed |
| Ambient temperature | -40 °C … 70 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | Contacting, bipolar |
| Switching element function | N/O contact |







