FESTO SMT-10M-PS-24V-E-0,3-L-M8D 551375 Proximity Sensor

The FESTO SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SMT-10M-PS-24V-E-0,3-L-M8D Category: Tags: , , Brand:

Description

FESTO SMT-10M-PS-24V-E-0,3-L-M8D 551375 Proximity Sensor

The FESTO SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For C-slot.
  • Special characteristics: Oil-resistant.
  • Measured variable: Position.

Technical Data

Brand FESTO
Model SMT-10M-PS-24V-E-0,3-L-M8D
Part number 551375
Product type Proximity Sensor
Design For C-slot
Special characteristics Oil-resistant
Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature -40 °C … 70 °C
Repetition accuracy 0.2 mm
Switching output PNP
Switching element function N/O contact
Switch-on time ≤1.3 ms
Switch-off time 4.2 ms … 7.3 ms
Max. switching frequency 130 Hz
Max. output current 100 mA
Max. output current using mounting kits 50 mA
Max. switching capacity DC 2.8 W
Max. switching capacity DC using mounting kits 1.5 W
Voltage drop ≤1.7 V
Off-state current <0.05 mA
Short circuit current rating Yes
Overload protection Yes
Rated operational voltage DC 24 V
Operational voltage range DC 5 V … 30 V
Residual ripple 10%
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores 3
Electrical connection 1, type of mounting Screw-type lock Rotatable
Electrical connection 1, compatible type of mounting Compatible with rotatable/non-rotatable screw-type lock
Electrical connection 1, connection pattern 00991155
Connection outlet orientation In-line
Material electrical contact Gold-plated brass
Material connector housing TPE-U(PU)
Material screw-type lock Brass, nickel-plated
Test conditions cable Bending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length 0.3 m
Cable characteristic Suitable for energy chains/robot applications
Cable sheath colour Grey
Material cable sheath TPE-U(PUR)
Material insulating sheath PP
Type of mounting Screw-clamped Insertable in the slot from above
Max. tightening torque 0.4 Nm
Mounting position Any
Product weight 6.7 g
Housing colour Black
Material housing Reinforced PA High-alloy stainless steel
Switching status indication Yellow LED
Ambient temperature with moving cable -20 °C … 70 °C
Degree of protection IP65 IP68

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SMT-10M-PS-24V-E-0,3-L-M8D as a proximity sensor under part number 551375. It lists design as For C-slot. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

SMT-10M-PS-24V-E-0,3-L-M8D

Part number

551375

Product type

Proximity Sensor

Design

For C-slot

Special characteristics

Oil-resistant

Measured variable

Position

Measuring principle

Magneto-resistive

Ambient temperature

-40 °C … 70 °C

Repetition accuracy

0.2 mm

Switching output

PNP

Switching element function

N/O contact