FESTO SMT-8M-A-PS-24V-E-5,0-OE 574336 Proximity Sensor

The FESTO SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SMT-8M-A-PS-24V-E-5,0-OE Category: Tags: , , Brand:

Description

FESTO SMT-8M-A-PS-24V-E-5,0-OE 574336 Proximity Sensor

The FESTO SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For T-slot.
  • Special characteristics: Oil-resistant.
  • Measured variable: Position.

Technical Data

Brand FESTO
Model SMT-8M-A-PS-24V-E-5,0-OE
Part number 574336
Product type Proximity Sensor
Design For T-slot
Special characteristics Oil-resistant
Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature -40 °C … 85 °C
Repetition accuracy 0.2 mm
Switching output PNP
Switching element function N/O contact
Switch-on time ≤1.3 ms
Switch-off time ≤7.3 ms
Max. switching frequency 130 Hz
Max. output current 100 mA
Max. output current using mounting kits 100 mA
Max. switching capacity DC 2.8 W
Max. switching capacity DC using mounting kits 2.8 W
Voltage drop <1.5 V
Short circuit current rating Yes
Overload protection Yes
Rated operational voltage DC 24 V
Operational voltage range DC 5 V … 30 V
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Cable
Electrical connection 1, connector system Open end
Electrical connection 1, number of connections/cores 3
Connection outlet orientation In-line
Test conditions cable Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Flexural strength: >50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm
Cable length 5 m
Cable characteristic Suitable for energy chains/robot applications
Cable sheath colour Grey
Material cable sheath TPE-U(PUR)
Material insulating sheath PP
Wire ends Wire ferrule
Type of mounting Screw-clamped Insertable in the slot from above
Max. tightening torque 0.6 Nm
Mounting position Any
Product weight 57.1 g
Housing colour Black
Material housing Reinforced PA High-alloy stainless steel
Switching status indication Yellow LED
Function reserve indication Orange LED
Ambient temperature with moving cable -20 °C … 85 °C
Degree of protection IP65 IP68 IP69K

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SMT-8M-A-PS-24V-E-5,0-OE as a proximity sensor under part number 574336. It lists design as For T-slot. Confirm the full variant before ordering.

Maintenance Inspection

Before replacing SMT-8M-A-PS-24V-E-5,0-OE, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

SMT-8M-A-PS-24V-E-5,0-OE

Part number

574336

Product type

Proximity Sensor

Design

For T-slot

Special characteristics

Oil-resistant

Measured variable

Position

Measuring principle

Magneto-resistive

Ambient temperature

-40 °C … 85 °C

Repetition accuracy

0.2 mm

Switching output

PNP

Switching element function

N/O contact