FESTO SMTO-8E-PS-S-LED-24 171178 Proximity Sensor

The FESTO SMTO-8E-PS-S-LED-24, part number 171178, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SMTO-8E-PS-S-LED-24 Category: Tags: , , Brand:

Description

FESTO SMTO-8E-PS-S-LED-24 171178 Proximity Sensor

The FESTO SMTO-8E-PS-S-LED-24, part number 171178, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For T-slot.
  • Measured variable: Position.
  • Measuring principle: Magneto-resistive.

Technical Data

Brand FESTO
Model SMTO-8E-PS-S-LED-24
Part number 171178
Product type Proximity Sensor
Design For T-slot
Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature -20 °C … 60 °C
Repetition accuracy 0.2 mm
Switching output PNP
Switching element function N/O contact
Switch-on time ≤1.3 ms
Switch-off time ≤7.3 ms
Max. switching frequency 130 Hz
Max. output current 100 mA
Max. switching capacity DC 2.8 W
Voltage drop ≤1.8 V
Inductive protective circuit Adapted to MZ, MY, ME coils
Off-state current ≤0.01 mA
Short circuit current rating Yes
Overload protection Yes
Operational voltage range DC 10 V … 30 V
Residual ripple 10%
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Plug
Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores 3
Electrical connection 1, type of mounting Snap-locking Screw-type lock Not rotatable
Electrical connection 1, compatible type of mounting Compatible with latching lock Compatible with rotatable screw-type lock
Electrical connection 1, connection pattern 00991155
Connection outlet orientation Lateral
Material electrical contact Gold-plated brass
Material screw-type lock Brass, nickel-plated
Max. tightening torque connector 0.3 Nm
Type of mounting Clamped in T-slot With accessories Insertable in the slot from above
Tightening torque 1 Nm
Mounting position Any
Product weight 12 g
Housing colour Black
Material housing TPE-U(PU)
Switching status indication Yellow LED
Degree of protection IP65 IP67

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SMTO-8E-PS-S-LED-24, part number 171178, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SMTO-8E-PS-S-LED-24 as a proximity sensor under part number 171178. It lists design as For T-slot. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

SMTO-8E-PS-S-LED-24

Part number

171178

Product type

Proximity Sensor

Design

For T-slot

Measured variable

Position

Measuring principle

Magneto-resistive

Ambient temperature

-20 °C … 60 °C

Repetition accuracy

0.2 mm

Switching output

PNP

Switching element function

N/O contact

Switch-on time

≤1.3 ms