FESTO SOEG-RT-Q30-NS-K-2L 165348 Diffuse Sensor
The FESTO SOEG-RT-Q30-NS-K-2L, part number 165348, is a diffuse sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SOEG-RT-Q30-NS-K-2L 165348 Diffuse Sensor
The FESTO SOEG-RT-Q30-NS-K-2L, part number 165348, is a diffuse sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Measurement method: Diffuse reflection sensor.
- Type of light: Infrared.
- Working range: 0 … 600 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SOEG-RT-Q30-NS-K-2L |
| Part number | 165348 |
| Product type | Diffuse Sensor |
| Measurement method | Diffuse reflection sensor |
| Type of light | Infrared |
| Working range | 0 … 600 mm |
| Ambient temperature | -25 … 55 °C |
| Switch output | NPN |
| Switching element function | Light switching |
| Max. switching frequency | 1,000 Hz |
| Max. output current | 200 mA |
| Voltage drop | 2 V |
| Short circuit strength | Pulsing |
| Operating voltage range DC | 10 … 30 V |
| Residual ripple | 20 % |
| Idle current | 25 mA |
| Polarity protected | for all electrical connections |
| Electrical connection | Cable 3-core |
| Cable length | 2.5 m |
| Material cable sheath | TPE-U(PUR) |
| Size | 30x30x15 mm |
| Mounting type | with through hole |
| Product weight | 85 g |
| Material housing | PBT-reinforced |
| Operating status display | Yellow LED |
| Operating reserve display | Green LED |
| Setting options | Potentiometer |
| Setting range lower limit | 0 mm |
| Upper limit of adjustment range | 600 mm |
| Ambient temperature with flexible cable installation | -5 … 55 °C |
| Protection class | IP65 |
| Corrosion resistance classification CRC | 2 – Moderate corrosion stress |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SOEG-RT-Q30-NS-K-2L, part number 165348, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SOEG-RT-Q30-NS-K-2L as a diffuse sensor under part number 165348. It lists measurement method as Diffuse reflection sensor. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SOEG-RT-Q30-NS-K-2L |
| Part number | 165348 |
| Product type | Diffuse Sensor |
| Measurement method | Diffuse reflection sensor |
| Type of light | Infrared |
| Working range | 0 … 600 mm |
| Ambient temperature | -25 … 55 °C |
| Switch output | NPN |
| Switching element function | Light switching |
| Max. switching frequency | 1,000 Hz |
| Max. output current | 200 mA |






