FESTO VADMI-200-N 162533 Vacuum Generator
The FESTO VADMI-200-N, part number 162533, is a vacuum generator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO VADMI-200-N 162533 Vacuum Generator
The FESTO VADMI-200-N, part number 162533, is a vacuum generator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Nominal size, Laval nozzle: 2 mm.
- Grid dimension: 22 mm.
- Silencer design: Closed.
Technical Data
| Brand | FESTO |
|---|---|
| Model | VADMI-200-N |
| Part number | 162533 |
| Product type | Vacuum Generator |
| Nominal size, Laval nozzle | 2 mm |
| Grid dimension | 22 mm |
| Silencer design | Closed |
| Mounting position | Any |
| Ejector characteristic | High vacuum |
| Grade of filtration | ≤40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Vacuum switch |
| Measured variable | Relative pressure |
| Measuring principle | Piezoresistive |
| Switching element function | N/O contact |
| Switching function | Threshold value comparator |
| Valve function | Closed |
| Reverse polarity protection | For all electrical connections |
| Display type | LED |
| Hysteresis setting range | -0.05 MPa … -0.005 MPa |
| Setting range hysteresis | -0.5 bar … -0.05 bar |
| Setting range hysteresis | -7.25 psi … -0.725 psi |
| Setting options | Poti |
| Switching status indication | Optical |
| Setting range threshold value | -0.09 MPa … 0 MPa |
| Setting range threshold value | -0.9 bar … 0 bar |
| Setting range threshold value | -13.05 psi … 0 psi |
| Operating pressure | 0.2 MPa … 0.8 MPa |
| Operating pressure | 2 bar … 8 bar |
| Operating pressure | 29 psi … 116 psi |
| Max. vacuum | 85 % |
| Nominal operating pressure | 0.6 MPa |
| Nominal operating pressure | 6 bar |
| Nominal operating pressure | 87 psi |
| Max. overload pressure | 5 bar |
| Air supply time at nominal operating pressure with ejector pulse | 0.15 s |
| Operational voltage range DC | 21.6 V … 26.4 V |
| Duty cycle | 100% |
| Switching output | NPN |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | 0 °C … 60 °C |
| Degree of protection | IP65 |
| Ambient temperature | 0 °C … 50 °C |
| Product weight | 360 g |
| Pressure measuring range | 0 MPa … 0.1 MPa |
| Pressure measuring range | 0 bar … 1 bar |
| Pressure measuring range | 0 psi … 14.5 psi |
| Electrical connection | M8x1 Plug |
| Type of mounting | With through-hole With female thread |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 3 | Integrated silencer |
| Vacuum connection | G3/8 |
| Material seals | NBR |
| Material receiver nozzle | Nickel-plated brass |
| Material filter | PA |
| Material filter housing | Makrolon® |
| Material housing | Wrought aluminium alloy |
| Material silencer | Packaging unit POM |
| Material piston | POM |
| Material transmitter nozzle | Nickel-plated brass |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model VADMI-200-N, part number 162533, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies VADMI-200-N as a vacuum generator under part number 162533. It lists nominal size, laval nozzle as 2 mm. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | VADMI-200-N |
| Part number | 162533 |
| Product type | Vacuum Generator |
| Nominal size, Laval nozzle | 2 mm |
| Grid dimension | 22 mm |
| Silencer design | Closed |
| Mounting position | Any |
| Ejector characteristic | High vacuum |
| Grade of filtration | ≤40 µm |
| Manual override | Non-detenting |
| Integrated function | Ejector pulse valve, electric Flow control On/off valve, electric Filter Check valve Vacuum switch |





