FESTO VL/O-3-1/4 9984 Pneumatic Valve

The FESTO VL/O-3-1/4, part number 9984, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: VL/O-3-1/4 Category: Tags: , , Brand:

Description

FESTO VL/O-3-1/4 9984 Pneumatic Valve

The FESTO VL/O-3-1/4, part number 9984, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 3/2-way, monostable, open/closed.
  • Type of actuation: Pneumatic.
  • Construction width: 30.5 mm.

Technical Data

Brand FESTO
Model VL/O-3-1/4
Part number 9984
Product type Pneumatic Valve
Valve function 3/2-way, monostable, open/closed
Type of actuation Pneumatic
Construction width 30.5 mm
Standard nominal flow rate (standardised to DIN 1343) 800 l/min
pneumatic working port G1/4
Operating pressure -0.095 MPa … 1 MPa
Operating pressure -0.95 bar … 10 bar
Design Poppet seat
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 7 mm
Grid dimension 32 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Type of piloting Direct
Pilot air supply External
Flow direction Reversible
lap Underlap
Pilot pressure 0.1 MPa … 1 MPa
Pilot pressure 1 bar … 10 bar
Switching time off 26 ms
Switching time on 7 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -20 °C … 60 °C
Media temperature -10 °C … 60 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -10 °C … 60 °C
Product weight 230 g
Type of mounting On manifold rail With through-hole
Pilot air port 110 G1/8
Pilot air port 12 G1/8
Pneumatic connection, port 1 G1/4
Pneumatic connection, port 11 G1/4
Pneumatic connection, port 2 G1/4
Pneumatic connection, port 3 G1/4
Pneumatic port 33 G1/4
Material seals NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model VL/O-3-1/4, part number 9984, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies VL/O-3-1/4 as a pneumatic valve under part number 9984. It lists valve function as 3/2-way, monostable, open/closed. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

VL/O-3-1/4

Part number

9984

Product type

Pneumatic Valve

Valve function

3/2-way, monostable, open/closed

Type of actuation

Pneumatic

Construction width

30.5 mm

Standard nominal flow rate (standardised to DIN 1343)

800 l/min

pneumatic working port

G1/4

Operating pressure

-0.95 bar … 10 bar

Design

Poppet seat