FESTO VUVG-BK14-T32C-AT-F-1H2L-S 8042570 Solenoid Valve

The FESTO VUVG-BK14-T32C-AT-F-1H2L-S, part number 8042570, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: VUVG-BK14-T32C-AT-F-1H2L-S Category: Tags: , , Brand:

Description

FESTO VUVG-BK14-T32C-AT-F-1H2L-S 8042570 Solenoid Valve

The FESTO VUVG-BK14-T32C-AT-F-1H2L-S, part number 8042570, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 2×3/2 closed monostable.
  • Type of actuation: Electrical.
  • Valve size: 14 mm.

Technical Data

Brand FESTO
Model VUVG-BK14-T32C-AT-F-1H2L-S
Part number 8042570
Product type Solenoid Valve
Valve function 2×3/2 closed monostable
Type of actuation Electrical
Valve size 14 mm
Standard nominal flow rate (standardised to DIN 1343) 350 l/min
pneumatic working port Flange
Operating voltage 24 V DC
Operating pressure 0.15 MPa … 0.7 MPa
Operating pressure 1.5 bar … 7 bar
Design Piston slide with sealing ring
Type of reset Pneumatic spring
Degree of protection IP40
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Signal status display LED
Max. switching frequency 2 Hz
Switching time off 20 ms
Switching time on 13 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 1600 µs
Max. negative test pulse with 1 signal 3000 µs
Characteristic coil data 24 V DC: 0.8 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 0 – No corrosion stress
Media temperature -5 °C … 50 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C … 50 °C
Product weight 75 g
Electrical connection 2-pin Plug pattern H, horizontal connection Plug
Type of mounting On manifold rail With through-hole
Pneumatic connection, port 2 Flange
Pneumatic connection, port 4 Flange
Material seals HNBR NBR
Material housing Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model VUVG-BK14-T32C-AT-F-1H2L-S, part number 8042570, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies VUVG-BK14-T32C-AT-F-1H2L-S as a solenoid valve under part number 8042570. It lists valve function as 2×3/2 closed monostable. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting VUVG-BK14-T32C-AT-F-1H2L-S, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

VUVG-BK14-T32C-AT-F-1H2L-S

Part number

8042570

Product type

Solenoid Valve

Valve function

2×3/2 closed monostable

Type of actuation

Electrical

Valve size

14 mm

Standard nominal flow rate (standardised to DIN 1343)

350 l/min

pneumatic working port

Flange

Operating voltage

24 V DC

Operating pressure

1.5 bar … 7 bar